Product Description
The TOX Deco 6/41 all-purpose wall plug is a versatile fixing for solid and hollow building materials. Its four-way split body expands in solid substrates and forms a secure knot in hollow materials, helping distribute force evenly and resist rotation while the screw is driven.
Why choose the TOX Deco 6/41?
- Works in concrete, solid brick, perforated brick, hollow block, aerated concrete, plasterboard and gypsum fibreboard.
- Four-part expanding body distributes force evenly.
- Anti-rotation features at the neck and body help stop the plug turning in the hole.
- The collar protects the surface and prevents the plug slipping too deeply into the drill hole.
- The detachable collar supports pre-positioned and push-through installation.
- Special internal geometry helps compatible screws drive smoothly.
Specifications
| Product | TOX Deco / 4AS-K all-purpose plug |
|---|---|
| Manufacturer product number | 016260041 |
| Pack quantity | 100 plugs |
| Plug size | 6 x 41 mm |
| Drill diameter | 6 mm |
| Minimum drill-hole depth | 50 mm |
| Anchoring depth | 40 mm |
| Compatible screw diameter | 3.5–5.0 mm |
| Material | Nylon |
| Application | Indoor and outdoor |
| Contents | 100 wall plugs; screws not included |
Indicative holding values
| Base material | Manufacturer holding value |
|---|---|
| Concrete C20/25 | 60 kg |
| Solid brick MZ 12 | 40 kg |
| Perforated brick ≥ Hlz12, density 1 kg/dm³ | 20 kg |
| Hollow block ≥ Hbl2 | 15 kg |
| Aerated concrete ≥ PB2, PP2 | 7 kg |
| 12.5 mm plasterboard | 10 kg |
| 12.5 mm gypsum fibreboard | 25 kg |
Important: Values are manufacturer guidance and assume the largest compatible screw diameter, correct anchoring depth, appropriate drilling method and a clean drill hole. They apply to installation in the base material, not in joints. Substrate condition and installation quality affect performance. Use an approved fixing or seek professional advice for safety-critical applications. Suitable for single-layer plasterboard only.
Installation
- Drill a 6 mm hole to a minimum depth of 50 mm using the drilling method appropriate for the material.
- Remove dust and debris from the hole.
- Insert the plug until the collar sits flush with the surface.
- Position the item and drive a 3.5–5.0 mm screw until secure. Do not overtighten.
