Gallery Lighting Maxi Kit – boxed transformer kit
Gallery Lighting Maxi Kit – transformer, 20m grey cable, junction box and adhesive tape

Gallery Lighting Maxi Kit

$385.00

200VA transformer kit for up to 18 compatible 7W LED lamps, with 20m grey flat lighting cable. Wands and globes sold separately.

At a glance

Transformer
200VA
Lighting cable
20m grey flat cable
Compatible lamps
up to 18 × 7W LED
Junction box
Included
  • Free deliveryAustralia-wide on orders over $35
  • Price guaranteeBuy with confidence
  • Satisfaction guaranteeAustralian support if you need it
SKU: GH-LIGHTING-TR200KIT Category:

Product Description

The Gallery Lighting Maxi Kit powers up to 18 compatible 7W LED lamps over approximately 20m of Gallery System track.

Included in the kit

  • 200VA transformer with 1.8m mains lead and Australian power plug.
  • 20m grey flat 12V lighting cable for the top of the track.
  • 3m black 12V output lead; white junction box pre-wired to the 20m grey flat cable.
  • Double-sided adhesive tape to secure the flat cable to the track.

Planning your installation

The junction box sits on the wall at the end of the track. Lighting wands and compatible 12V MR16 LED globes are sold separately. Use track covers where cable is exposed at corners or planned gaps.

The kit has a 1.8m mains lead and Australian power plug. Any hard-wiring or modifications on the 240V side must be carried out by a licensed electrician.

Specifications

Transformer

200VA
Lighting cable

20m grey flat cable
Compatible lamps

up to 18 × 7W LED
Junction box

Included
How many lights can this kit power?

Use up to 18 compatible 7W LED lamps over approximately 20m of track. Do not exceed the maximum lamp count.

What is included?

200VA transformer, 1.8m mains lead and plug, 3m black 12V output lead; white junction box pre-wired to the 20m grey flat cable, and double-sided adhesive tape.

Where does the cable connect?

The junction box sits on the wall at the end of the track. The grey flat cable runs across the top of the Gallery System track.

What else do I need?

Lighting wands and compatible 12V MR16 LED globes are sold separately. Use track covers where cable is exposed at corners or planned gaps.

Can it be hard-wired?

The kit has a 1.8m mains lead and Australian power plug. Any hard-wiring or modifications on the 240V side must be carried out by a licensed electrician.

Can I install the Gallery Lighting System myself?

Yes. The low-voltage Gallery Lighting components can be installed by a confident DIY installer or experienced handyperson when the transformer is connected to an existing power point.

Before installing the transformer, track cable or lighting wands, read our complete Gallery Lighting installation guide.

Any new power point, concealed mains wiring or hard-wired change to the 240-volt supply must be completed by a licensed electrician.

If you would prefer professional installation, find an authorised installer.